Bulldog Specialty Color Bar Stool

Construction

Joints: Mortise and tenon. Glued with high solids glue and reinforced with 18 gauge nails, corner blocks and low root woodscrews.

9-Step Finishing Process

1. The bare wood of the assembled chair is thoroughly sanded using 120 grit paper.

2. One coat of stain is sprayed onto the entire chair – including the underside of the seat.

3. The stain is handwiped to ensure an even color and maximum penetration into the wood.

4. The chair is inspected and any necessary adjustments made.

5. One coat of a catalyzed sealer is sprayed onto all wood parts to completely seal the wood – including the underside of the seat.

6. Once dry, the sealer is sanded using 320 grit paper.

7. A final sanding is done using Scotch Brite pads to remove any sanding marks.

8. A catalyzed lacquer is sprayed on. This lacquer is very durable and will stand up in a commercial environment.

9. A final inspection is performed prior to packaging to ensure a high level of quality control.